TRADITION RS AEROKIT

Part No: P997. 22. 7000 / 7002

Front Spoiler | Part No: P997.22.1020

For all Porsche 997 Carrera models with the standart front bumper!
The mounting is very easy.. with some screwing points under the Porsche front bumper.
Not for models with the Aerokit or Turbo | GT2 | GT3 Front Bumper

Front Bumper Air Vent Grill | Part No: P997.20.1010

An important component for both cooling and aerodynamics.
Ensuring the rapid removal of hot air.
Optimized unit cooling.
Front bumper RS grill for all Porsche 997 Carrera models incl. 4S / GTS / Turbo

LOUVERS SLATS | PART NO: P997. 20.1080

They are such a unique feature, so important.
By opening the front fenders, and allowing the hot air from the brakes to get ventilated out of the wheel arch!

To mount on top or bottom of the exist front fender.
For all Porsche 997 Carrera |S |4S |GTS |GT3 |Targa |Turbo S |GT2 |GT2 RS |Sport Classic |

SIDE SKIRTS (C2)| PART NO: P997. 20. 2022

Our Side Skirts are much wider than the stock components, which leads to a wider underbody and thus to more downforce.
The mounting is very easy.. plug & play with 3M double tape.

For all Porsche 997 Carrera with the (C2) narrow body | S | GT3

Side Skirts (C4) | Part No: P997.20.2020

Our Side Skirts are much wider than the stock components!! which leads to a wider underbody and thus to more downforce.
The mounting is very easy .. plug&play at the oem screwing points.

For all Porsche 997 Carrera with the wide body | 4 | 4S | GT2 RS | GT3 RS | Turbo.

Lid Spoiler – "Ducktail" | Part No: P997.20.3020

Here we have paid much attention to the aerodynamics and the cooling of the engine.
Ensuring the cooling air requirements.
Air resistance-optimized unit cooling and ventilation.
Optimization of position and shape of cooling air inlets.

MOSHAMMER® Patented mounting system: plug & play without any cutting or drilling!
Easy mounting at the oem screwing points!
For all Porsche 997 Carrera Models.

Rear Diffuser | Part No: P997.22.3040

The mounting is very easy.. plug & play with 3M double tape and 2 screws on the screwing points.
For all Porsche 997 Carrera models.
Not for Turbo | GT2 | GT3.

X-PIPE RACE EXHAUST | PART NO: P997.22.4080

Porsche 997.2 Carrera S | 4S | GTS 3.8L 385Hp> 407Hp / 2009>
Performance X-PIPE Race Exhaust (Replaces OEM centre exhaust).

Advantages of X-PIPE RACE !!
Considerable weight reduction! Extreme reduction of thermals by low exhaust back pressure.
Performance enhancement and more torque !!
No CEL (Check Engine Light) Horsepower and torque increased up without software upgrade Deep aggressive exhaust sound.
Reduced temperature.
Significant weight savings over the stock system.
Direct bolt on replacement the exhaust fits the original mufflers sets.
100% Made in Germany

SOUND VIDEO

Sport Performance Springs | PART NO: P997.22.6024

(2WD)Lowering F| 15 mm Lowering R| 15 mm.
(2WD) Lowering F| 30 mm Lowering R| 30 mm.
(4WD) Lowering VA 20-25 mm Lowering HA 20-25 mm.

"Please send us the VIN of your Porsche, so that we can offer you the right product".

Monotube Coil-Overs | PART NO: P997.22.7024

(2WD) Lowering F| 30-60 mm Lowering R| 20-50 mm.
(4WD) Lowering F| 30-60 mm Lowering R| 20-50 mm.

"Please send us the VIN of your Porsche, so that we can offer you the right product".

Trak+Wheel Spacers | PART NO: P997.22.8024

You can choose between width per axle from:
10mm/ 14mm / 28mm/ 30mm.
Please write us what width you need exactly.
Spacers for both platforms: (2WD) & (4WD).

Ultracon Wheels | PART NO: P303.20.8511

Width: front 20 x 8,5 | rear 20 x 11
Bolt pattern 5x130 | CB 71,6mm

For all Porsche 997 with the narrow body (Carrera S)
Not for models with Porsche Center Lock (screw)

Available in: Silver crystal gloss
Individually: Black matt or gloss

Ultracon Wheels | PART NO: P303.20.8512

Width: front 20 x 8,5 | rear 20 x 12
Bolt pattern 5x130 | CB 71,6mm

For all Porsche 997 with the wide body | 4 | 4S | GT2 | GT3 RS | Turbo S
Not for models with Porsche Center lock (screw)

Available in: Silver crystal gloss
Individually: Black matt or gloss

ULTRACON WHEELS | PART NO: P303.20.851X

Here is an example picture in Individually: Black matt

Width: front 20 x XX | rear 20 x XX
Bolt pattern 5x130 | CB 71,6mm

For all Porsche
Not for models with Porsche Center Lock (screw)

TRADITION RS AEROKIT

Porsche 997 Carrera Mk2 (2008 – 2012) AeroKit to have the classy look of the legendary RS models in a modern interpretation.

Of course you can also order each part separately....!!!

All parts also suitable for the C2 Narrow & C4 Wide body models.

MOSHAMMER products are made of the best composite materials on market, this brings a strong stability with a very low weight.

Click on the link to see some of our customers vehicles from all over the world:
CUSTOMERS CARS

Request